De-risking Timber Cladding - A Tested Timber Cladding System vs Sum of Parts
Cart (0)

De-risking Timber Cladding - A Tested Timber Cladding System vs Sum of Parts

Traditional timber claddings use standard timbers, profiled to “industry standard profiles” and coated according to a given specification with a third party coating product.

Every time a change to one component of this sum of parts is made, there is the potential for problems. Typical examples of failure include inappropriate code compliant timbers combined with a certain profile, or more commonly the incorrect coating being selected.

These problems manifest themselves in different ways, and are highly expensive to remediate after they are found.

“In many instances product failure becomes a finger pointing exercise between the timber manufacturer, the coatings company and the specifier.”


There is a huge amount of variance in the types of fixing used for timber cladding, from nail guns to annual grooved nails. Many contractors are tempted to use the fastest solution without considering longer term problems.

Fixings represent the weak point in timber cladding. Moisture is most likely to enter weatherboards through fasteners penetrations. Abodo’s hidden fix system ensures no fasteners penetrate through the exposed face, minimising the chance of installation issues and moisture ingress.


It is virtually impossible for coatings manufacturers to test their coatings with every timber substrate, there is simply too many options. The best they can do is identify commonly used timbers. For that reason it is common to see short term failure of coatings, particularly semi transparent coatings on timber cladding.

The use of darker colours is a minefield for specifiers – darker colours attract heat, which can manifest itself in increases substrate movement and resin bleed (for softwoods). Increased substrate movement means coats prematurely fail, in some cases flaking off.

Little attention is paid to the role of surface texturing prior to coating. Texturing a surface increases both the loading, penetration and adhesion of coatings – simply put coatings applied to a textured surface will out perform a smooth face every time.

Dark colour failure – Sydney, Australia

Film forming coating failure – Auckland, New Zealand


Modern day facades includes screening systems and other complementary timber accessories.

A system is needed to allow designers to have the freedom to specify a range or timber elements with the same look, maintenance cycles and weathering characteristics.




Choose Timber

Choose Profile



Timber: Vulcan Cladding

Type: Rusticated 90x20MM

Lineal Meters:


Total approximate weight - KG:


Fixings - Pieces:


Oil - Litres (second coat to front face installed):


Oil - Litres (one coat all sides + two coats face):


Note: The figures given here include 10% wastage and are approximate only. Final order quantities are the buyer’s responsibility and should be checked and verified prior to order placement. Abodo will not accept liability for over or under-ordered items. Thank you!


* Required


Thank you for your enquiry, you'll receive an email with more information shortly.